100 101, Cisco Networking Devices Part 1 Learning Objectives}

Submitted by: Nihal Warda

100-101, Interconnecting Cisco Networking Devices Part 1 exam certification will help the professionals in getting CCENT CCNA Routing and Switching CCDA CCNA Security CCNA Service Provider Operations CCNA Voice CCNA Wireless. The exam timing is ninety minutes for solving fifty to sixty questions given by the vendor.

100-101, Interconnecting Cisco Networking Devices Part 1 exam comprises of the learning of the Cisco devices which are made available to the candidates and are of great knowledge, we have listed some of the important items in this article which are in the paragraph below.

The Operation of IP Data Networks is the first section which consists of the objectives of, purpose and functions of various network devices such as routers, switches, bridges and hubs, components required to meet a given network specification, applications and their impact on the network, purpose and basic operation of the protocols in the OSI and TCP/IP models, data flow between two hosts across a network, media, cables, ports, and connectors to connect Cisco network and devices to other network devices and hosts in a LAN.

The 100-101, Interconnecting Cisco Networking Devices Part 1 second section is called LAN Switching Technologies in which the applicant study about technology and media access control method for Ethernet networks, basic switching concepts and the operation of Cisco switches for example Collision domains, Broadcast domains, Ways to switch, Store, Forward, Cut through and CAM Table. initial switch configuration including remote access management includes hostname, Mgmt ip address, default-gateway, local user and password, enable secret password, console and VTY logins, exec-timeout, service password encryption, copy run start, network status and switch operation using basic utilities.

VLANs create logically separate networks, network segmentation and basic traffic management concepts, Configure and verify VLANs, Configure and verify trunking on Cisco switches and the Auto-negotiation.

The 100-101, Interconnecting Cisco Networking Devices Part 1 third section is IP addressing (IPv4/IPv6) which includes the objectives of operation and necessity of using private and public IP addresses for IPv4 addressing, IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment, IPv4 addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN environment, technological requirements for running IPv6 in conjunction with IPv4 for example, Dual stack, Describe IPv6 addresses, Global unicast, Multicast, Link local, Unique local, EUI 64 and Auto-configuration.

Fourth section of 100-101, Interconnecting Cisco Networking Devices Part 1 is called IP Routing Technologies that covers the objectives of basic routing concepts, Packet forwarding, Router lookup process, Process Switching/Fast Switching/CEF, verify utilizing the CLI to set basic Router configuration, Hostname, router configuration and network connectivity using cds neighbors, routing configuration for a static or default route given specific routing requirements, Differentiate methods of routing and routing protocols such as Static vs. dynamic, Link state vs. distance vector, Next hop, routing table, Passive interfaces (how they work), Configure and verify OSPF Benefit of single area, Configure OSPv2 in a single area, Configure OSPv3 in a single area, Router ID, Passive interface, verify interval routing by means of Sub interfaces, Upstream routing, Encapsulation and Configure SVI interfaces.

About the Author: Are you looking for best study material provider for

certifyschool.com/product/ccent/100-101/

Questions and

certifyschool.com/vendor/cisco/ccent/

Answers? Most of us advise CertifySchool for their best quality.

Source:

isnare.com

Permanent Link:

isnare.com/?aid=1923805&ca=Computers+and+Technology}